On Oct 28, 3:48 am, "Ken Hart" <kwh...@[EMAIL PROTECTED]
> wrote:
> "piterengel" <pslavi...@[EMAIL PROTECTED]
> wrote in message
>
> news:1193472333.598880.285210@[EMAIL PROTECTED]
> snip> These are my first two results. I've mounted on camera an EFKE 25
> > film, I've taken 8 pictures, cut this first part adn put into a tank.
> > Than I've taken again 8 pictures, the same of first time, cut film and
> > put un another tank. I've dobe this three times.
> > Than I've developed first part with ID-13 for 3 mins. Images are well
> > contrasted BUT NOT enough. I remember I'm trying to obtain LINE works.
> > With the second part I've used Kodak D-85 for 2.5 mins. SURPRISE!
> > Everything is disappeared!!! I've a totally empty film, without any
> > shadow or kind of figure! What's happen?
>
> Re: the D-85: Completely clear, including no edge printing? That's a
> processing problem. Either the developer had no activity at all, or you
> confused the developer and the fixer, and fixed the film first,
completely
> clearing it. (Everyone has to make that mistake at least once...I'm
waiting
> for it to happen to me!)
>
> You might want to take a chunk of film and just put it in the developer
to
> see if it turns black, and how long it takes.
Assuming that errors can occour, this is not the case. I've prepared
D-85 and immediately put into the tank, so I've developed film, not
fixed. The fact is that everything is disappeared form film, numbers
of pictures and trade mark too. Surely this is an extremely strong
developer, I'm thinking to try again it but diluited ten times.
Bye.
P.
|
