Re: Some simple questions about Single-Tray Processing

>> I have problems with the drum 'walking' to one side or the other as it
>> rotates. I've tried adjusting the leveling screw, but can't seem to get

>> it right. Any suggestions? My current solution is to just have it walk
to 
>> one side and set a container there to stop it from going further.

Try placing a flat rubber band around the cylinder, to the inside of one 
wheel and outside of  the other (if there is room on the outside) so that 
there is about 1/8" to 1/4"  room for movement.

Mine walks, then walks back.