Nicholas O. Lindan wrote:
> "john" <x@[EMAIL PROTECTED]
> wrote
>
>> On EvilBay there is an Aristo T12. .... Is there a particular "gotcha"
to
>> beware of?
>
> You may need to stick to graded paper - it looks like the
> original 'actinic' tube. I had a head with this tube on
> a D-series Omega and it only wanted to produce grade 4+
> VC prints. Some people say they can get by throwing
> a lot of yellow filtration into the system.
>
Aristo make a lot of different color tubes in their heads, each with a
different characteristic curve. Some will work pretty well with about Y40
or
so yellow filter in addition to your regular vc filters. Others will not.
You might find the following curves helpful:
http://www.aristogrid.com/spd.htm
They also make heads with a blue and a green tube so you can use VC paper
more easily. I have an Aristo head (D2HI) that came with either a W45 or a
V54 tube in it and that worked OK with a yellow filter, although I used
graded paper at the time, so it did not matter much to me.
--
.~. Jean-David Beyer Registered Linux User 85642.
/V\ PGP-Key: 9A2FC99A Registered Machine 241939.
/( )\ Shrewsbury, New Jersey http://counter.li.org
^^-^^ 08:15:01 up 10 days, 47 min, 3 users, load average: 4.02, 4.06,
4.09
|
